Panasonic KX-TG7301NZ Operating Instructions Manual page 45

Making/answering calls, intercom
Problem
w is flashing.
Noise is heard, sound
cuts in and out.
The handset does not
ring.
The base unit does not
*1
ring.
I cannot make a call.
*1 KX-TG7321/KX-TG7322
Cause/solution
L The handset is not registered to the base unit. Register
it (page 26).
L The handset is too far from the base unit. Move closer.
L The base unit's AC adaptor is not connected. Check
the connections.
L You are using the handset or base unit in an area with
high electrical interference. Place the base unit and
use the handset away from sources of interference.
L You are using the handset or base unit in an area with
high electrical interference. Place the base unit and
use the handset away from sources of interference.
L Move closer to the base unit.
L If you use a DSL/ADSL (JetStream) service, we
recommend that you contact your DSL/ADSL service
provider to have a DSL/ADSL Splitter installed. We do
not recommend the use of generic DSL/ADSL filters.
Contact your DSL/ADSL service provider for details.
L The ringer volume is turned off. Adjust ringer volume
(page 23).
L The ringer volume is turned off. Adjust ringer volume
(page 24).
L The handset is too far from the base unit. Move closer
and try again.
L Another unit is in use. Wait and try again later.
L Answering system is being used.
later.
L If you are using a BT double adaptor to connect the
unit, remove the adaptor and connect the unit to the
phone wall socket directly. If the unit operates properly,
check or replace the adaptor.
L The key lock feature is turned on. Turn it off (page 20).
L The unit is not designed to be used with rotary/pulse
dialling services.
Useful Information
*1
Wait and try again
45