Panasonic DMC-GH4 Basic Operating Instructions Manual page 76

Wi-Fi/NFC
∫ About the Wi-Fi connection lamp
Lit blue: The Wi-Fi connection is on standby
Blinking blue: Sending/receiving data through the Wi-Fi
connection
•
The camera cannot be used to connect to a public wireless LAN connection.
•
Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a wireless
access point.
•
It is recommended to use a fully charged battery when sending images.
•
When sending images on a mobile network, high packet communication fees may be incurred
depending on the details of your contract.
•
Do not remove the memory card or battery or move to an area without any reception
while sending images.
•
The monitor display may become distorted for an instant while connected to the service,
however this will not affect the image being sent.
•
If you use the HDMI output during recording with [Bit Mode] in [HDMI Rec Output] set to
[4:2:2 10bit], the Wi-Fi function will be disabled.
∫ About the [Wi-Fi] button
Pressing and holding [Wi-Fi] before connecting to Wi-Fi
(When connecting to a smartphone/tablet)
•
The information required for connecting the smartphone/tablet to
this unit (QR code, SSID and password) is displayed. (P78)
Pressing [Wi-Fi] before connecting to Wi-Fi
•
Following items can be selected.
[New Connection]
[Select a destination from History]
[Select a destination from Favorite] Connects with settings registered as favourites.
76
VQT5H82 (ENG)
Connects with the same settings as the previous ones.
Registering records as favourites
1 Select the item you want to register to favourites,
and then press 1.
2 Enter a registration name.
—