Adding Location Information To Images Stored In The Camera From A Smartphone/Tablet - Panasonic DMC-GH4 Basic Operating Instructions Manual

Wi-Fi/NFC
Adding location information to images stored in the camera from a
smartphone/tablet
You can send location information acquired with a smartphone to the camera. After
sending the information, you can also write it on images stored in the camera.
1 Start recording location
information
2 Start recording images
3 Finish recording the location
information
4 Sending and writing location
information
•
Location information different from that
at the time of recording may be written.
Keep the following points in mind:
–
Set the camera's [Home] setting in [World Time] to your region.
–
Once you start recording location information with your smartphone, do not change the
camera's [Home] setting in [World Time].
•
Location information cannot be written on images that were recorded when the clock was not set.
∫ Start recording location information
Operate the smartphone.
1 Select [ ].
2 Select [Geotagging].
3 Select [ ].
∫ Finish recording the location information
Operate the smartphone.
1 Select [ ].
2 Select [Geotagging].
3 Select [ ].
∫ Sending and writing location information
1
Connect to a smartphone. (P78)
2
Operate the smartphone.
1 Select [ ].
2 Select [Geotagging].
3 Select [ ].
•
Follow the on-screen messages to operate the smartphone.
•
Location information is not written onto the images recorded when [Rec Format] is set
to [AVCHD].
•
When the card in the camera lacks sufficient free space, writing location information
may not be possible.
•
Cautions for Use:
Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject
when you use this function. Use at your own risk.
•
(When using "Image App" for iOS)
If you press the Home or On/Off button of the smartphone while location information is being
recorded, the recording will stop.
84
VQT5H82 (ENG)
GPS






