Panasonic DMC-LZ6 Operating Instructions Manual page 91

Do not use benzine, thinner or alcohol
for cleaning the camera.
• Before cleaning the camera, remove the
batteries or disconnect the AC adaptor
(DMW-AC6E; optional) from the electrical
outlet.
• The body of the camera may be damaged
and the surface finish may peel off.
• Wipe the camera with a soft, dry cloth.
• Do not use kitchen detergent or a
chemically treated cloth.
∫ About the LCD monitor
• Do not press the LCD monitor with
excessive force. Uneven colours may
appear on the LCD monitor and it may
malfunction.
• If the camera is cold when you turn it on,
the picture on the LCD monitor will be
slightly darker than usual at first. However,
the picture will return to normal brightness
when the internal temperature of the
camera increases.
Extremely high precision technology is
employed to produce the LCD monitor
screen. However there may be some
dark or bright spots (red, blue or green)
on the screen. This is not a malfunction.
The LCD monitor screen has more than
99.99% effective pixels with a mere
0.01% of the pixels inactive or always lit.
The spots will not be recorded on
pictures on the built-in memory or a
card.
∫ About the Lens
• Do not press the lens with excessive
force.
• Do not leave the camera with the lens
facing the sun as it may cause the camera
to malfunction. Also, be careful when you
leave the camera outside or near a
window.
∫ Batteries
Be sure to remove the batteries when
you will not be using the camera for a
long period of time.
• If the temperature is too high or low, the
terminals may rust causing a malfunction.
If you drop the batteries accidentally,
check to see if the body of the batteries
and the terminals are damaged.
• Inserting damaged batteries in the
camera will damage the camera.
Bring charged spare batteries when
going out.
• Be aware that the operating time of the
batteries becomes shorter in low temperature
conditions such as at a ski resort.
Dispose of unusable batteries.
• Batteries have a limited life.
• Do not throw batteries into fire because
they may cause an explosion.
Do not allow battery terminals to come
into contact with metal objects (such as
necklaces, hairpins, etc.).
• This can cause short circuiting or heat
generation and you may be badly burned
if you touch the batteries.
∫ Card
Do not leave the card where the
temperature is high, where
electromagnetic waves or static
electricity are easily generated or
exposed to direct sunlight.
Do not bend or drop the card.
• The card may be damaged or the recorded
content may be damaged or deleted.
• Put the card in the card case or the
storage bag after use and when storing or
carrying the card.
• Do not allow dirt, dust or water to get into
the terminals on the back of the card and
do not touch the terminals with your
fingers.
Others
91
VQT1C52