Panasonic DMC-LZ6 Operating Instructions Manual page 51

∫ Changing the settings for the aspect
ratio and the picture quality
1 Press [MENU/SET].
2 Press 3/4 to select
[ASPECT RATIO] and then press
1.
REC
W.BALANCE
ASPECT RATIO
PICT.MODE
AF MODE
STABILIZER
SELECT
3 Press 3/4 to select the item and
then press [MENU/SET].
4 Press 3/4 to select [PICT.MODE]
and then press 1.
REC
W.BALANCE
ASPECT RATIO
PICT.MODE
AF MODE
STABILIZER
SELECT
5 Press 3/4 to select the item and
then press [MENU/SET].
If you selected [
2
shown in step
Item Picture size
[30fpsVGA]
640k480 pixels
[10fpsVGA]
[30fpsQVGA]
320k240 pixels
[10fpsQVGA]
If you selected [
2
shown in step
Item Picture size
[30fps16:9]
848k480 pixels
[10fps16:9]
• fps "frames per second"; This refers to
the number of frames used in 1 second.
/
1
2
AWB
MODE1
MENU
SET
/
1
2
AWB
ON
MENU
SET
] on the screen
fps
30
10
30
10
] on the screen
fps
30
10
• You can record smoother motion
pictures with "30 fps".
• You can record longer motion pictures
with "10 fps" although the picture quality
is lower.
• The file size with [10fpsQVGA] is small
so it is suitable for e-mails.
• You can only record motion pictures
to the built-in memory when the
[ASPECT RATIO] is [
picture size is [30fpsQVGA] or
[10fpsQVGA] (320k240 pixels).
6 Press [MENU/SET] to close the
menu.
• You can also press the shutter
button halfway to close the menu.
• The focus range becomes the same as
macro mode. [5 cm (Wide)/50 cm (Tele) to
¶]
• Refer to P101 for information about the
available recording time.
• The available recording time displayed on
the screen may not decrease regularly.
• You cannot record audio. (DMC-LZ6)
• This unit does not support recording
motion pictures on MultiMediaCards.
• When you set the picture quality to
[30fpsVGA] or [30fps16:9], we
recommend using a High Speed SD
Memory Card with "10MB/s" or greater
displayed on the package.
• Depending on the type of the card,
recording may stop in the middle.
• We recommend using Panasonic's SD
Memory Card/SDHC Memory Card.
• Depending on the type of the card, the
card access indication may appear for a
while after recording motion pictures. This
is not a malfunction.
Advanced (Recording pictures)
] and the
VQT1C52
51