Download  Print this page

Panasonic CQC1120AN Operating Instructions page 2

Cd player/receiver
Hide thumbs
   

Advertisement

How to Enjoy Music
PTY (Programme Type)/
BAND/APM (Auto Preset Memory)/
MONO/LOC(Local)
y/5 (Pause)
]TUNE[
6 TRACK 7
CD Slot
Fast Forward/Fast Reverse
CQ-C1120AN
SRC (Source)/
1 to 6 (Preset Memory)
POWER
TA (Traffic Announcement)
MUTE/SQ (Sound Quality)
AF (Alternative Frequency)/
REG (Region)
VOLUME/SEL (Select)
DISP (Display)/CT (Clock Time)
Power on
Enjoy music in each mode
Press to power on.
Press to select a mode as follows.
Press again and hold to power off.
Sound Controls
■ Volume Adjustment (Setting range: 0 to 40)
Turn to adjust
■ Sound Control
■ Sound Quality (SQ)
SQ is a function that can call up various sound types at the
1
Press to select a mode
touch of button in accordance with your listening music type.
Press and hold [MUTE] (SQ) for more than 2 seconds to select
the sound type as follows:
2
Turn to change each level
Volume
(0 to 40)
Bass
(–12 to +12 in 2 dB step)
Treble
(–12 to +12 in 2 dB step)
(left/right: 1 to 15)
Balance
Fader
(front/rear: 1 to 15)
Note: If no operation takes place for 5 seconds or more (2 seconds in the volume
mode), the display return to the regular mode.
Notes:
■ Mute
If no operation takes place for more than 5 seconds in the SQ mode, the
display returns to the regular mode.
Press to switch on and off.
Settings of SQ, bass/treble are influenced one another. If the influence
mentioned above causes distortion to audio signal, readjust bass/treble
Mute the sound completely.
or volume.
1
2
Eject
Preset Memory
Up to 6 stations can be stored in each of the FM1, FM2, FM3 and
AM (LW/MW) band selections.
Press to select a band for
preparation.
Band
Radio
■ Auto Preset Memory
Hold down for 2 seconds or more.
Radio
Notes:
CD Player
When a disc is loaded.
■ Manual Preset Memory
Use seek or manual tuning to find a station.
Hold down one of the preset buttons [1] to [6] until
the display blinks once.
Note:
New stations overwrite existing saved stations after following
this procedure.
■ Preset station calling
Press
Never preset stations while driving.
Caution:
Only discs with the label at right are available.
(default) :
flat frequency response:
does not emphasize.
(ROCK) :
speedy and heavy sound:
■ When a disc is not loaded
exaggerates bass and treble.
Insert a disc and playback starts automatically.
(POP)
:
wide-ranged and deep sound:
CD
slightly emphasizes bass and
treble.
Player
Disc indicator
(VOCAL) :
clear sound:
Make sure that the disc indicator is off before loading a
disc.
emphasizes middle tone and
If the disc indicator lights, eject the disc, then load a new
slightly emphasizes treble.
disc.
It takes several seconds between the instant when inserting a CD and the
instant when starting playback.
Do not use discs that have a seal or label attached.
Do not insert foreign matter into the disc slots.
FM1
Press to select a band.
FM2
Mono/Local Selection
FM3
■ Seek tuning
AM (LW/MW)
Mono: Reduce noise if weak signals are received
Hold down for 0.5 seconds or more.
Local: Only strong signals of stations are searched for in seek tuning.
Tuning will automatically stop when the next sta-
tion is found.
■ FM broadcast
[ [ ] : higher frequency
[ ] ]: lower frequency
Hold down [PTY] (MONO/LOCAL) for 2 seconds or more to
change the mode.
■ Manual Tuning
■ AM(LW/MW) broadcast
[ [ ] : higher frequency
Press [PTY] (MONO/LOCAL) to change the mode.
[ ] ]: lower frequency
LOCAL indicator
CQ-C1120AN
Frequency
Preset Number
MONO indicator
Automatically tune the 6 stations with good reception and
FM broadcast
AM(LW/MW) broadcast
save under preset buttons [1] to [6].
Preset stations appear for 5 seconds each.
MONO OFF/LOCAL OFF
LOCAL OFF
Only RDS stations will be saved at default setting (AF is
MONO ON/LOCAL OFF
LOCAL ON
ON).
To stop scanning, press one of the preset buttons [1] to
MONO ON/LOCAL ON
[6].
MONO OFF/LOCAL ON
Display Change
Program Service Name
Frequency
Clock Time
[1]
to
[6]
to call a preset station.
Note:
A station name appears when it is an RDS station.
■ Track selection and track search
Available Discs
Non-available
Next track:
[7] Press
Start of current track:
[6] Press once
CD-RW
CD-RW
CD-RW
8 cm
8 cm
8 cm
WMA
WMA
WMA
MP3
MP3
MP3
Previous track:
[6] Press twice
This unit does not support CD text display.
Fast forward:
[7] Hold down
Fast reverse:
[6] Hold down
Release it to resume regular CD play.
■ Pause
Press [BAND] (h/5) to pause. Press again to resume to playback.
■ Disc Eject
Press [u] to stop CD play and eject the disc.
Convenient
TA
Function
Traffic Announcements
To automatically listen to a station
Radio Data
that gives traffic information periodically.
System (RDS)
RDS is a system performing convenient functions for
FM stations in such as Europe. However, there may be
some areas where RDS is not effective for reception.
Station name appears instead of the frequency.
The clock is automatically adjusted.
■ To select TA mode
PTY (MONO/LOC)
a
Press [TA].
AF
(Default : TA OFF)
8 To cancel
Notes:
If a selected station is in poor receiving condition,
Alternative frequency
another station giving traffic announcements will be
automatically tuned in.
When reception is poor, an RDS station broadcasting
When TA ON is selected, only TP station will be
the same program is tuned in automatically.
searched. When TA ON is selected, only TP station will
be memorized automatically.
Even in CD player mode, a station giving the traffic
information is automatically received.
■ To listen to TA only
AF indicator
DISP
a
Hold down [TA] for 2 seconds or more (in FM
■ To select AF receiving sensitivity
mode).
a
Press [AF]
To cancel
a
AF1 : For mountain areas and places enclosed by high-
rise buildings or other objects that prevent radio
reception. (Default)
■ TA Volume Set
AF2 : For suburbs and other places free of obstructions
of view.
a
Turn [VOL] while receiving traffic announce-
OFF : For the AF function inactivated.
ments.
■ To change AF range
The TA volume differs from the regular volume (by up
to 5 levels).
a
Hold down [AF] for 2 seconds or more.
REGION ON : To select a station broadcasting the
same program
Down
REGION OFF : To select an AF station of the same net-
work
(The program may be different) (Default)
Press
EON
■ AF1 or AF2 auto preset memory
The memory is valid for the RDS stations only.
A station of the same network in good receiving condi-
Enhanced Other Networks
tion is received.
(3 seconds)
If a preset station is in poor receiving condition, anoth-
Traffic information of the other networks is received.
er station in good receiving condition can be tuned in
Preset AF data is refreshed at all times.
to by pressing the same preset button. (Best Station
Research)
Another station broadcasting the same program is
searched for if a station with an appropriate frequency
cannot be found even by means of BSR (Best Stations
Research). (PI seek: Program Identification Seek)
Note: For PI Seek, cancel the TA mode first, then exe-
cute PI Seek.
Display Change
Press
Track Number/Playing Time
Clock Time
PTY
Program Type
Stations can be selected by program type, for example,
news and rock.
TA indicator
TP indicator
PTY indicator
Lights up while receiving a TP
■ To select mode PTY
station
a
Press [PTY].
To cancel
a
Press
[PTY]
again.
■ PTY preset call
a
Press
again.
a
Press [1] to [6].
[TA]
The following program types are preseted.
Preset No. Program Type Contents
1
NEWS
NEWS
2
SPEECH
AFFAIRS, INFO, EDUCATE,
DRAMA, CULTURES, SCIENCE,
VARIED, WEATHER, FINANCE,
CHILDREN, SOCIAL A,
RELIGION, PHONE IN, TRAVEL,
LEISURE, DOCUMENT
3
SPORT
SPORT
4
POP M
POP M
5
CLASSICS
CLASSICS
6
MUSIC
ROCK M, M_O_R_M, LIGHT M,
OTHER M, JAZZ, COUNTRY,
NATIONAL, OLDIES, FOLK M
Press
again. (Or, raise the volume with
[TA]
■ PTY selection
).
[VOL]
(Volume Level: 1 to 40)
q Press []TUNE[] to select a program type
below.
w Press [BAND] for automatic selection.
SPEECH
MUSIC
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURES
SCIENCE
VARIED
POP M
ROCK M
M_O_R_ M
LIGHT M
CLASSICS
OTHER M
WEATHER
FINANCE
CHILDREN
Up
SOCIAL A
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY
NATIONAL
OLDIES
FOLK M
DOCUMENT
■ PTY preset change
q Select a program type by using PTY selection
or PTY preset call.
w Hold down [1] to [6] for 2 seconds or more.
When there is no corresponding program type,
Note:
"NO PTY" is displayed.
■ Emergency Announcement
An emergency announcement, if broadcast, is automat-
ically received.
This function operates in other than the radio mode,
and "ALARM" flashes.
Note:
Press
[DISP]
to switch the PTY display language
to Swedish.
Playing Variation
CQ-C1120AN
Random indicator
Repeat indicator
■ RANDOM
■ SCAN
■ REPEAT
Random play
10 seconds play of each track.
Repeat play
Press [4].
lights.
Press [6].
lights.
R5
Press [5].
REP
Press again to cancel in each play mode.

Advertisement

Table of Contents
loading

  Related Manuals for Panasonic CQC1120AN

This manual is also suitable for:

Cqc1120gnCqc1110anCqc1110gnCqc1100vn