Recall Button - Panasonic KX-TG2551ALS, KX-TG2551NZS Operating Instructions Manual

Special Features

RECALL Button

Pressing
(RECALL)
such as transferring an extension call or accessing special telephone
services (optional) such as call waiting.
Selecting the recall time
The recall time depends on your telephone exchange or host PBX. You can
select the following recall times: "700, 600, 400, 300, 250, 110, 100 or 90
msec (milliseconds)". KX-TG2551AL comes from the factory set to "100
msec" and KX-TG2551NZ comes from the factory set to "600 msec".
Make sure the handset is in the standby mode initially.
1 Press
(FUNCTION/EXIT/CH)
2 Press
Ö
points to "Program".
3 Press
FWD/EDIT á
4 Press
Ö
points to "Recall time".
5 Press
FWD/EDIT á
6 Press
Ö
desired time is displayed.
7 Press
FWD/EDIT á
A beep sounds.
To return to the standby mode, press (FUNCTION/EXIT/CH).
You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
Users in Australia can access Telstra's "EASY CALL" service by having the recall
time set at 100 msec (this is the factory default setting), and then follow Telstra's
"EASY CALL" instructions to operate this service.
If the unit is connected via a PBX, PBX functions (transferring a call etc.) might
not work correctly. Consult your PBX supplier for the correct setting.
For Call Waiting Service Users in New Zealand
Make sure the recall time is set to 600 msec for use with Telecom's
Call Waiting Service. Press
while talking.
The first call is put on hold and you can answer the second call.
To return to the first caller, press (RECALL) again.
Your telephone company may not support the second caller display feature.
42
allows you to use special features of your host PBX
or repeatedly until the arrow
Ñ
(Yes key).
or repeatedly until the arrow
Ñ
(Yes key).
or repeatedly until the
Ñ
(Save key).
(RECALL)
.
if you hear a call-waiting tone
H
Program
LCD contrast
GF H
=Yes
Save DIRECT#
H
Recall time
GF H
=Yes