Editing The Caller's Phone Number - Panasonic KX-TG2551ALS, KX-TG2551NZS Operating Instructions Manual

Using the Caller List

Editing the Caller's Phone Number

You can edit a phone number in the Caller List.
Make sure the handset is in the standby mode initially.
Lift the handset off the base unit and press
1
or
Ö Ñ
2 Press
(Å)
desired caller.
3 Each time you press FWD/EDIT
(Edit key) to edit, the number is
rearranged into one of 2 different
patterns.
a
Phone no.
(The first 2 digits are deleted.)
b Free editing
•You can add digits to the front of the
number, up to a total of 20 digits
including the original number.
•Each time you press (CLEAR),
— after you add a number, the digit to
the left of the cursor is erased.
— when the cursor is at the front, the
digit on the cursor is erased.
•When you press FWD/EDIT (É), the phone number returns to the original
number shown in step 2.
4 After editing the number, you can continue with calling back or
storing procedures.
To call back, press
To store the number in the directory, press
FWD/EDIT (É)
page 27, from step 5.)
•The number edited in step 3 will not be maintained in the Caller List.
For New Zealand Users:
Your telephone company may charge you for a local call if the number
dialled has the area code prefix included. If the charge for local call is
unacceptable, only the 7-digits of the local number should be dialled
from your telephone. Do not dial the "0" prefix or the area code digit.
26
to enter the Caller List.
or repeatedly to find the
(Ä)
(TALK)
(Save key). (If the caller has no name information, see
FWD/EDIT (É)
(É)
a
FWD/EDIT (É)
b
FWD/EDIT (É)
(p. 25).
0276543210
11:20A JAN12 √
(Edit key)
76543210
G H
=Next
(Edit key)
0276543210
G H
=Next
Ex. "0" is added.
00276543210
G H
=Next
(Edit key)
(Next key), and press
(Å)
=Edit
=Edit
=Edit