Selecting The Playback Source; Selecting The Source From The Start Menu; Selecting The Source By The Remote Control - Panasonic SC-PT85 Operating Instructions Manual

Selecting the playback source

Selecting the source from the START menu

You can select sound effects, desired source, or access playback/menus
by using the START menu.
1
Press [START]C to show the START menu.
This unit automatically turns on.
(The TV also turns on when using VIERA Link "HDAVI Control". This
works only when in "DVD/CD" or "USB" mode without any disc/device
being loaded/connected.)
e.g.
DVD/CD
Input Selection
Sound
OK
2
Press [3, 4]9 to select an item and press [OK]9.
≥ To exit, press [START]C.
3
Press [3, 4]9 to make the setting and press [OK]9.
When "Input Selection" is selected
You can select a desired source from the menu.
≥ DVD/CD ( 9), FM (
IN ( below), USB (
§
§ "(TV)" will appear beside "AUX" or "DIGITAL IN", indicating the TV
audio setting for VIERA Link "HDAVI Control" (
When "Sound" is selected
You can select sound quality settings (
When a disc is loaded or an USB device is connected, you can also
access playback or menus from the START menu.
e.g. [DVD-V]
DVD/CD
Playback Disc
TOP MENU (DVD)
MENU (DVD)
Input Selection
Sound
When the on-screen control panel appears
e.g. [DVD-V] (when "Playback Disc" is selected from the START menu)
You can operate the playback with the indicated controls.

Selecting the source by the remote control

Press To select
[DVD]@ DVD/CD
[RADIO]@ FM
[EXT-IN]@ Each time you press the button:
USB:
AV:
AUX :
§
D-IN :
§
MUSIC P.:
§ "(TV)" will appear beside "AUX" or "D-IN", indicating the
TV audio setting for VIERA Link "HDAVI Control" (
[Note]
Confirm the audio connection to the SCART (AV), AUX or OPTICAL IN
terminal on the main unit when you select the corresponding sources
( 8). Reduce the volume on the TV to its minimum, and then adjust the
volume of the main unit.
10
10
Home Cinema
9), AV ( below), AUX ( below), DIGITAL
§
16), MUSIC PORT ( 16)
15).
11, Equaliser).
Home Cinema
Playback/menu access
( 16)
For audio input through the SCART (AV)
terminal.
For audio input through the AUX terminal.
For audio input through the
OPTICAL IN terminal. ( right)
For audio input through MUSIC PORT. (
Making settings for digital audio input
Select to suit the type of audio from the OPTICAL IN terminal on the main
unit.
1 While in "D-IN" mode
Press [SETUP]; to select "MAIN/SAP", "DRC" or "PCM FIX".
2 While the selected mode is displayed
Press [3, 4]9 to make the setting.
MAIN/SAP mode (Only works with Dolby Dual Mono):
MAIN, SAP , MAIN+SAP
§
"SAP" = Secondary Audio Program
§
Dynamic Range Compression
DRC ON: Adjust for clarity even when the volume is low by
compressing the range of the lowest sound level and the
highest sound level. Convenient for late night viewing.
(Only works with Dolby Digital)
DRC OFF: The full dynamic range of the signal is reproduced.
PCM FIX mode
PCM ON: Select when receiving only PCM signals.
PCM OFF: Select when receiving Dolby Digital and PCM signals.
(When receiving true 5.1-channel surround sound, select "PCM OFF".)
[Note]
≥ Audio that is input through the OPTICAL IN terminal is not output from
the HDMI terminal.
≥ Underlined items in the above paragraphs are factory settings.
16)
15).
(stereo audio)
§