Table of Contents
Advertisement
Getting Started
1-D Belt Clip
You can hang the handset on your belt or pocket
using the belt clip.
To attach the belt clip
To remove the belt clip
2
Making/Answering Calls
TALK Indicator
(TALK)
(CH)
• For best operating performance, see
section 6-C.
Backlit handset keypad
The handset dialling buttons will light
when you press a button or lift the
handset off the base unit, and flash
when a call is received. The lights will
go out a few seconds after pressing a
button, lifting the handset or answering
a call.
1-E Optional Headset
Plugging an optional headset into the handset allows a hands-free phone conversation. Please use only
the Panasonic KX-TCA88 headset.
Connecting the optional headset to the handset
Open the headset jack cover, and connect the optional headset to the headset jack
as shown.
When the optional headset is connected to the handset, make sure to use the headset to talk with the
caller. If you want to have a normal cordless phone conversation, disconnect the headset.
2-A Making Calls
1
Press
(TALK)
•The TALK indicator lights.
•If an alarm tone sounds, see 6-E.
2
Dial a phone number.
3
To hang up, press (TALK) or place
,
the handset on the base unit.
(REDIAL)
To redial the last number dialled
\
Press
(TALK)
To select the receiver volume
3 levels (HIGH, MEDIUM, LOW) are available.
Press
or
while talking.
Ñ
Ö
•Each time you press
level will change.
If noise interferes with the
conversation
Press
to select a clearer channel or move
(CH)
closer to the base unit.
.
.
(REDIAL)
or
, the volume
Ñ
Ö
H
Headset Jack
2-B Answering Calls
If the handset is off the base unit,
press (TALK).
•You can also answer a call by pressing any dialling
button
to
,
or
(— Any Key Talk).
(0)
(9)
(*)
(#)
OR
If on the base unit, just lift up.
Selecting the ringer volume
The TALK indicator light must be off.
•To select HIGH (preset) or LOW,
press
or
.
Ñ
Ö
Each time you press
or
Ñ
change and the selected volume will ring.
•To turn the ringer OFF,
press and hold
until 2 beeps sound.
Ö
•To turn the ringer ON,
press
.
Ñ
The ringer will sound at the HIGH level.
•When you replace the battery, the selected ringer
volume setting will return to the factory default.
Section 1
Section 2
, the ringer volume will
Ö
Advertisement
Table of Contents
