Step 5 Easy Setup; Setting Up The Radio; Presetting Stations Automatically; Confirming The Preset Channels - Panasonic SC-PT70 Operating Instructions Manual

step 5 EASY SETUP
The Easy setup screen assists you in making necessary
settings.
Preparation
Turn on your TV and select the appropriate video input mode (e.g.
VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this unit.
≥ To change your TV's video input mode, refer to its operating
instructions.
≥ This remote control can perform some basic TV operations (
1
Press [Í]1 to turn on the unit.
≥ When the Easy setup screen appears automatically, skip step
2 to 6.
2
Press [DVD]@ to select "DVD/CD".
3
Press [SETUP]; to show the setup menu.
4
Press [3, 4]9 to select "OTHERS" and press [OK]9.
5
Press [3, 4]9 to select "EASY SETUP" and press
[OK]9.
6
Press [OK]9 to select "SET".
7
Press [3, 4]9 to select "Yes" and press [OK]9.

Setting up the radio

Presetting stations automatically

Up to 30 stations can be set.
1
Press [RADIO]@ to select "FM".
2
Press [MENU]:.
Each time you press the button:
LOWEST (factory preset):
To begin auto preset with the lowest frequency.
CURRENT:
To begin auto preset with the current frequency.
To change the frequency, refer to "Manual tuning" (
§
3
Press and hold [OK]9.
Release the button when "FM AUTO" is displayed.
The tuner starts to preset all the stations it can receive into the
channels in ascending order.
≥ "SET OK" is displayed when the stations are set, and the radio tunes
to the last preset station.
≥ "ERROR" is displayed when automatic presetting is unsuccessful.
Preset the channels manually (

Confirming the preset channels

1
Press [RADIO]@ to select "FM".
2
Press the numbered buttons to select a channel.
≥ To select a 2-digit number
e.g. 12: [S10]3
Alternatively, press [X, W]6.
≥ The FM setting is also shown on the TV display.
8
8
Menu
MAIN
DISC
VIDEO
AUDIO
DISPLAY
HDMI
OTHERS
SET
RETURN
EXIT : SETUP
§
right).
[1] [2]
8
Follow the messages and make the settings with
[3, 4]9 and [OK]9.
( below, Easy setup settings)
9
Press [OK]9 to finish Easy setup.
Easy setup settings
4).
≥Language
Select the language used on menu screen.
≥TV aspect
Select the aspect to suit your TV.
≥Speakers position
Select "5.1ch layout" mode or "2.1ch layout" mode according to your
speaker layout (
≥Speaker check
Listen to speaker output to confirm speaker connections.
≥Speaker output
Make surround sound setting for speaker output.
Only when "5.1ch layout" mode is selected in "Speakers position"
§
above.
[Note]
≥ If this unit is connected to a "HDAVI Control 3 or later" compatible TV
via HDMI cable, the menu language and TV aspect information will be
retrieved via VIERA Link.
≥ If this unit is connected to a "HDAVI Control 2" compatible TV via
HDMI cable, the menu language information will be retrieved via
VIERA Link.
≥ Settings in the Easy setup can also be changed in the player settings
[e.g. language, TV aspect (
If noise is excessive
Press and hold [PLAY MODE]2 to display "MONO".
To cancel the mode, press and hold the button again until "AUTO ST" is
displayed.
≥ The mode is also cancelled when you change the frequency.

Manual tuning

1
Press [RADIO]@ to select "FM".
2
Press [6, 5]A to select the frequency.
right).
≥ To start automatic tuning, press and hold [6, 5]A until the
frequency starts scrolling. Tuning stops when a station is found.
Presetting stations manually
Up to 30 stations can be set.
1 While listening to the radio broadcast
Press [OK]9.
2 While the frequency is flashing on the display
Press the numbered buttons to select a channel.
≥ To select a 2-digit number
e.g. 12: [S10]3
Alternatively, press [X, W]6, and then press [OK]9.
A station previously stored is overwritten when another station is stored
in the same channel preset.
6, Positioning).
§
15)].
[1] [2]