Table of Contents
Advertisement
3
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (page
25).
4
Select "Ringer Setup", then press
{>}.
Select "Night Mode", then press {>}.
5
Select "Ring Delay", then press {>}.
6
7
Select the desired setting, then press
{>}.
Press {ih}.
8
Call options
Changing the recall time
Change the recall time, if necessary,
depending on the requirements of your
service provider or PBX.
Press {j/OK}.
1
2
Select "Base Unit Setup", then
press {>}.
3
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (page
25).
4
Select "Call Options", then press
{>}.
Select "Recall", then press {>}.
5
6
Select the desired setting, then press
{>}.
Press {ih}.
7
Setting pause length
Change the pause length, if necessary,
depending on the requirements of your
service provider or PBX.
Press {j/OK}.
1
2
Select "Base Unit Setup", then
press {>}.
3
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (page
25).
4
Select "Call Options", then press
{>}.
5
Select "Pause Length", then press
{>}.
6
Select the desired setting, then press
{>}.
Press {ih}.
7
Storing/changing emergency
numbers
These settings determine which phone
numbers can be dialled while the call bar
feature is on (page 18).
Press {j/OK}.
1
2
Select "Base Unit Setup", then
press {>}.
3
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (page
25).
4
Select "Call Options", then press
{>}.
5
Select "Emergency No.", then press
{>}.
6
Select a memory location, then press
{>}.
L If the memory location already
contains an emergency number, the
number is displayed.
7
Enter/edit the number, then press
{j/OK}.
L To erase an emergency number, press
and hold {C/T}.
Press {ih}.
8
Note:
L The default setting for emergency
numbers are stored in the first 3 memory
locations. It is recommended that you do
not overwrite these numbers.
Base Unit Settings
23
Advertisement
Table of Contents
