Table of Contents
Advertisement
Ringer setup
Ringer volume
Press {j/OK}.
1
2
Select "Handset Setup", then press
{>}.
3
Select "Ringer Setup", then press
{>}.
4
Select "Ringer Volume", then press
{>}.
Press {e} or {v} repeatedly to select
5
the desired volume.
Press {>}.
6
Press {ih}.
7
Note:
L The handset will ring for intercom calls
and when paged even if the ringer is
turned off.
Changing ringtones
You can change the ringtone used by the
handset.
"Ext. Ringtone": Selects the ringtone for
outside calls.
"Int. Ringtone": Selects the ringtone for
intercom calls.
Press {j/OK}.
1
2
Select "Handset Setup", then press
{>}.
3
Select "Ringer Setup", then press
{>}.
Select the desired item, then press {>}.
4
5
Select the desired ringtone, then press
{>}.
Press {ih}.
6
Night mode
Night mode allows you to select a block of
time during which the handset will not ring
for outside calls. This feature is useful for
times when you do not want to be disturbed,
for example, while sleeping. Night mode can
be set independently for the handset and the
base unit (page 22).
Set the date and time beforehand (page 9).
Setting the start and end time for night
mode
Press {j/OK}.
1
2
Select "Handset Setup", then press
{>}.
3
Select "Ringer Setup", then press
{>}.
Select "Night Mode", then press {>}.
4
Select "Start/End", then press {>}.
5
6
Enter the desired hour and minute you
wish to start this feature by selecting 2
digits for each.
L If you use 12-hour time entry, select
"AM" or "PM" by pressing {*}
repeatedly before entering the time.
7
Enter the desired hour and minute you
wish to end this feature by selecting 2
digits for each.
L If you use 12-hour time entry, select
"AM" or "PM" by pressing {*}
repeatedly before entering the time.
Press {j/OK}.
8
Press {ih}.
9
Turning night mode on/off
Press {j/OK}.
1
2
Select "Handset Setup", then press
{>}.
3
Select "Ringer Setup", then press
{>}.
Handset Settings
17
Advertisement
Table of Contents
