Special Instructions For Time Settings; Special Instructions For Ringer Setup - Panasonic KX-TG1891NZ Operating Instructions Manual

Digital cordless phone
Table of Contents

Advertisement

N
Handset Settings
Special instructions
for time settings
Alarm
An alarm will sound for 3 minutes at the
set time once or daily. Set the date and
time beforehand (page 13).
" (centre of joystick) i N i
1
#
{^}/{V}: "Time Settings" i
2
#
{^}/{V}: "Alarm" i # 2 times
3
{^}/{V}: Select an alarm mode. i
4
#
"Off"
Turns alarm off. Press # again,
then press {ih} to finish.
"Once"
The alarm sounds once at the set
time. Enter the desired date and
month.
"Daily"
An alarm sounds daily at the set time.
5
Enter the desired hour and minute.
i #
{^}/{V}: Select the desired ringtone.
6
i #
{^}/{V}: "Save" i # i
7
{ih}
L When the alarm is set, e is
displayed.
Note:
L To stop the alarm, press any dial key.
L When in talk or intercom mode, the
alarm will not sound until the call has
ended.
L If you select "Once", the setting will
change to "Off" after the alarm
sounds.
22
Special instructions
for ringer setup
Night mode
Night mode allows you to select a block
of time during which the handset will not
ring for outside calls. This feature is
useful for times when you do not want to
be disturbed, for example, while
sleeping.
Using the handset phonebook's
category feature (page 17), you can also
select categories of callers whose calls
will override night mode and ring the
handset (Caller ID subscribers only).
Set the date and time beforehand (page
13).
Setting the start and end time
" (centre of joystick) i N i
1
#
{^}/{V}: "Ringer Setup" i #
2
{^}/{V}: "Night Mode" i #
3
{^}/{V}: "Start/End" i #
4
5
Enter the desired hour and minute
you wish to start this feature.
6
Enter the desired hour and minute
you wish to end this feature.
# i {ih}
7
Turning night mode on/off
" (centre of joystick) i N i
1
#
{^}/{V}: "Ringer Setup" i #
2
{^}/{V}: "Night Mode" i #
3
{^}/{V}: "On/Off" i #
4
{^}/{V}: "On" or "Off" i #
5
i {ih}

Advertisement

Table of Contents
loading

Table of Contents