Clock Functions - AEG BE531400KM User Manual

10 www.aeg.com
5.7 Heat-up indicator
When you activate an oven function, the
bars in the display

6. CLOCK FUNCTIONS

6.1 Clock functions table
Clock function
00:00
6.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
"12:00". "12" flashes.
1. Press
2. Press
the minutes.
The display shows
hour. "00" flashes.
3. Press
minutes.
4. Press
day will be saved automatically after
5 seconds.
The display shows the new time.
come on one by
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE MINDER
COUNT UP TIMER
and
or to set the hours.
to confirm and switch to set
and the set
or to set the current
to confirm or the set time of
one. The bars show that the oven
temperature increases or decreases.
Application
To show or change the time of day. You can change the
time of day only when the appliance is off.
To set how long the appliance operates. Use only when
an oven function is set.
To set when the appliance deactivates. Use only when
an oven function is set.
To combine DURATION and END function.
Use to set a countdown time. This function has no ef-
fect on the operation of the appliance. You can set the
MINUTE MINDER at any time, also if the appliance is
off.
If you do not set any other clock function the COUNT
UP TIMER automatically monitor how long the appli-
ance operates. It is on immediately when the oven
starts to heat.
The Count Up Timer cannot be used with the functions:
DURATION, END, core temperature sensor.
To change the time of day press
again and again until the indicator for the
time of day
6.3 Setting the DURATION
1. Set an oven function.
2. Press
starts to flash.
3. Press
the hours for DURATION time.
4. Press
When the time ends an acoustic signal
sounds for 2 minutes.
setting flash in the display. The appliance
deactivates automatically.
5. Press any button to stop the acoustic
signal.
flashes in the display.
again and again until
or to set the minutes and
to confirm.
and time