Panasonic KX-TG1311NZ Operating Instructions Manual page 21

Problem Cause/solution
Noise is heard, sound L You are using the handset or base unit
cuts in and out.
L Move closer to the base unit.
L If you use a DSL/ADSL (JetStream)
I fully charged the L Clean the charge contacts and charge
batteries, but 7 still
flashes.
L It is time to replace the batteries
I fully charged the L Clean the battery ends (S, T) and the
batteries, but the
operating time seems to
be shorter.
in an area with high electrical
interference. Re-position the base unit
and use the handset away from
sources of interference.
service, we recommend that you
contact your DSL/ADSL service
provider to have a DSL/ADSL Splitter
installed. We do not recommend the
use of generic DSL/ADSL filters.
Contact your DSL/ADSL service
provider for details.
again (page 7).
(page 7).
charge contacts with a dry cloth, and
charge again.
Problem Cause/solution
Caller information is not L You must subscribe to a Caller ID
displayed.
L If your unit is connected to any
L If you use a DSL/ADSL (JetStream)
L Other telephone equipment such as a
Caller information is slow L Depending on your service provider/
to display.
L Move closer to the base unit.
Useful Information
service. Contact your service provider/
telephone company for details.
additional telephone equipment,
remove and plug the unit directly into
the wall jack.
service, we recommend that you
contact your DSL/ADSL service
provider to have a DSL/ADSL Splitter
installed. We do not recommend the
use of generic DSL/ADSL filters.
Contact your DSL/ADSL service
provider for details.
monitored Burglar Alarm or the modem
in the SKY Digital decoder may be
interfering with this unit. Disconnect the
other equipment and try again.
telephone company, the unit may
display the caller's information at 2nd
ring or later.
21