Useful Information - Panasonic KX-TG1311NZ Operating Instructions Manual

Useful Information

Useful Information
Troubleshooting
If you still have difficulties after following the instructions in this section,
disconnect the base unit's AC adaptor and turn off the handset, then
reconnect the base unit's AC adaptor and turn on the handset.
Problem
w is flashing.
20
Cause/solution
L The handset is too far from the base
unit. Move closer.
L The base unit's AC adaptor is not
connected. Check the connections
(page 5).
L You are using the handset or base unit
in an area with high electrical
interference. Re-position the base unit
and use the handset away from
sources of interference.
L The handset registration is cancelled.
Register the handset to the base unit
(page 22).
Problem Cause/solution
I cannot make or receive L The base unit's AC adaptor or
calls.
L If you are using a BT double adaptor to
L The call bar feature is turned on. Turn it
L You dialled a call restricted number
L The key lock feature is turned on. Turn
L The unit is not designed to be used with
The unit does not ring. L The ringer volume is turned off. Adjust
The handset display is L The handset is not turned on. Turn the
blank.
The handset will not turn L Make sure that the batteries are
on.
L Fully charge the batteries (page 7).
I have changed the L Change the display language
display language to a
language I cannot read.
A busy tone is heard L The handset is too far from the base
when {C} is pressed.
telephone line cord is not connected.
Check the connections.
connect the unit, remove the adaptor
and connect the unit to the phone wall
socket directly. If the unit operates
properly, check or replace the adaptor.
off (page 15).
(page 16).
it off (page 11).
rotary/pulse dialling services.
the ringer volume (page 14).
power on (page 7).
installed correctly (page 7).
(page 10).
unit. Move closer and try again.