Functional Description - Makita DA3000R Instruction Manual

FUNCTIONAL
DESCRIPTION
1
2
1. Speed control screw
2. Switch lever (paddle switch)
1. Reversing switch knob
ASSEMBLY
6
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action
003018
CAUTION:
• Before plugging in the tool, always check to see that the
switch lever actuates properly and returns to the "OFF"
position when released.
To start the tool, simply squeeze the switch lever. Tool speed
is increased by increasing pressure on the switch lever.
Release the switch lever to stop.
A speed control screw is provided so that maximum tool
speed can be limited (variable).
Reversing switch action
003026
This tool has a reversing switch to change the direction of
rotation. Turn the reversing switch knob so that its protrusion
will point to
for counterclockwise rotation.
1
CAUTION:
• The switch lever (paddle switch) cannot be squeezed
with the reversing switch knob positioned halfway
between
forcibly, the tool may be damaged.
• Always check the direction of rotation before operation.
• Use the reversing switch only after the tool comes to a
complete stop. Changing the direction of rotation before
the tool stops may damage the tool.
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
marking for clockwise rotation or
marking and marking. If it is squeezed
marking