Troubleshooting Guide - Panasonic RR-QR100 Operating Instructions Manual

ENGLISH

Troubleshooting guide

Before requesting service for this unit, check the chart below for a possible cause of the problem you are experiencing. Some simple checks
or a minor adjustment on your part may eliminate the problem and restore proper operation.
If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to the directory of
Authorized Service Centers (enclosed with this unit) to locate a convenient service center, or consult your dealer for instructions.
Symptom
Unit doesn't operate.
No sound from the speaker.
When using earphone (not included),
there is no sound or it is difficult to hear
or there is noise.
"U01" appears on the display.
Recording stops.
Recording not made.
The date of recording appears as "– – – –".
Playback speed is too fast or slow.
"FULL" appears when trying to make a
recording.
Cannot erase a folder or file.
The clock flashes "12:00".
Is HOLD on?
Is the battery cover properly closed?
Is earphone (not included) connected?
Is the volume turned down?
Is the earphone plug fully inserted?
Is the plug dirty? (Wipe away dirt on plug.)
Have the batteries run down?
Has VAS functioned?
Did the batteries or cover come loose during recording?
Has the time been set?
(The date of recording is not displayed unless the time has been set.)
Has playback speed been changed? (Set to the required speed.)
Have 99 files been recorded in the folder?
Has the recording time limit been made? Erase unneeded files.
Have you selected an empty folder?
Is the file locked?
Set the clock.
Checkpoints Page
64
60
88
84
88
—
62
80
—
66
88
70
—
96
66
105