Table of Contents
Advertisement
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the
remedies indicated in the chart do not solve the problem, consult your dealer for instructions.
Symptom
Battery
Cannot use a battery that can be
still used on other equipment.
Operations
No operation.
Cannot operate when "
Display
"
", "
" blinks.
"
" appears.
"
" appears.
"
" appears.
N o r m a l d i s p l a y a p p e a r s
during setting operation.
"
" appears.
• This unit considers the battery as empty even if there is actually
power left in it. This is to preserve the clock setting.
• Make sure the batteries are correctly inserted.
• You cannot operate on this unit when the unit is connected to a computer.
" appears.
• The Hold function is on. Switch Hold off ( ➜ page 6).
• Please set the time ( ➜ page 7).
• There are 99 files in folder A, B, C, D.
• There is no remaining memory ( ➜ page 40). Delete unnecessary
recording files, files and data other than MP3 files ( ➜ pages 12, 26).
• If the batteries are extremely exhausted, "
unit is connected to the computer and the computer does not recognise this
unit. Disconnect this unit from the computer once, replace the batteries (If
batteries are not inserted, insert batteries.) ( ➜ page 5) and reconnect it.
• This appears when updating data in this unit (e.g. after disconnecting
this unit from the computer, when turning the power on, etc.).
• When you do not operate for 60 seconds during setting operation, the
setting in process is cancelled and normal display appears.
• Format was performed on a computer, etc., or the file system is
damaged. Perform format on this unit (The data is all erased after
formatting is complete.) ( ➜ page 12).
Checkpoints
" is displayed even if the
33
Advertisement
Table of Contents
