Panasonic TYTP10E Operating Instructions Manual page 8

Registration
Registration to the TV for this use is required when using
the Touch Pen for the fi rst time after purchase or using it on
another TV.
1. Turn the (plasma) TV on to start registration of the Touch
Pen by operation on the TV.
• For how to start registration of the Touch Pen, see the
operating instructions of the TV.
2. Press the power button with the Touch Pen turned off.
(When performing registration on another TV again, press
the power button for 5 seconds or longer.)
• Registration of the Touch Pen to the TV will start.
• The indicator lamp blinks in red and green alternately
during registration.
• Place the Touch Pen within 50 cm from the TV during
registration.
• The Touch Pen automatically turns off if registration fails
even if 2 minutes or longer have elapsed.
3. When the indicator lamp blinks in green for approx. 3
seconds, registration is complete and the TV is connected
at the same time.
• After registration, when the Touch Pen is turned on
near the TV that is already on, it will be automatically
reconnected to the TV.
• If registration is cancelled on the TV, register it again.
8