Panasonic KX-PS8000 Reference Manual page 139

Error message
No ASPI managers were
found!!
One or more ASPI for
DOS managers are
loaded which do not
support ASPI for WIN16!!
Printing aborted for
occurred SCSI error.
SCSI Error!! Time Out
occurred.
The printer does not print
correctly (not an error
message).
Unable to Allocate
Memory
*.DLL function Error
*.DLL not found
Some applications settings may take priority over the printer driver settings.
Possible cause
SCSI board and its driver are not
installed correctly.
An illegal error has occurred.
The printer is not responding.
The computer is not properly
communicating with the printer.
The computer's internal memory for
printing is insufficient.
The necessary file for printing is not
found.
Troubleshooting
Recovery
Correctly install the SCSI board and its
driver. (Refer to the instructions manual of
the SCSI board.)
For any other trouble related to SCSI,
refer to the SCSI section of
Troubleshooting ( P.147).
B Confirm the SCSI board is correctly
installed in the computer or cable is
correctly connected.
B Turn off the computer, then turn it on
again.
Turn off the system (scanner / printer /
computer) and turn on again. Then print
the document again.
Follow the procedure below and disable
the bi-directional interface.
1. Double-click Status display setup icon in
KX-PS8000 Utilities program group.
2. Click Device tab.
3. Click off Monitor Printer check box.
4. Click OK.
The Status Display function becomes
ineffective.
B Close the windows of the applications
except for the one which controls the
printer, then print again.
B Turn off the computer, then turn it on
again.
Reinstall the KX-PS8000 software.
139