Table of Contents
Advertisement
31939_KX-TCD700CX_Czech
Registration
• Registering a Handset to a Base Unit (
The handset supplied with the base unit is already registered. If an optional
handset/base unit is purchased, the following procedure needs to be carried out
before initial use.
and Hold
(Standby Mode)
or
or
or
or
NOTES:
• Charge the optional handset batteries for about 10 hours
before initial use.
• Register the handset within 1 minute. If not registered
within 1 minute,
programming mode. Then re-start registration.
• Calls (both incoming and outgoing) can be conducted only
via the displayed base unit (even if the radio areas overlap
with neighbouring base units).
Note:
• To return to the previous step during programming,
• To exit the programming mode at any time,
18/6/01
1:54 pm
on base unit for 10 secs. A confirmation tone sounds.
or
on the handset to cancel the
Page 36
)
• Select base unit.
• ("Hyphen" is moving during
or
searching).
Connection OK.
See Page 37.
• Enter PIN (4 digits).
(Searching Base).
• Base is found.
• On completion of
registration, a
confirmation tone
sounds.
• If registration is not
successful within
5 minutes, an error
tone sounds and
display returns to
original standby
mode.
.
.
36
or
or
Advertisement
Table of Contents
