Setting Time Alarm Function; Set Time Of Alarm; Set Alarm On/Off - Panasonic KX-TCD700BX Operating Instructions Manual

31939_KX-TCD700CX_Czech

Setting Time Alarm Function

Within the Time Alarm menu, it is possible to program the following:

• Set Time of Alarm (

• Set Alarm ON/OFF (

to once (
(Standby Mode)
or
or
or
To Stop the Alarm
When the alarm sounds, press any dialling button
to , ,
• The alarm time turns off and the display returns to the
standby mode. If '
automatically turned off.
• If the unit is in talk or intercom mode during the alarm
time, the alarm will not sound. After finishing, the
alarm will start ringing.
Note:
• To return to the previous step during programming,
• To exit the programming mode at any time,
18/6/01 1:54 pm
).
). (In this mode, it is possible to set the alarm
), repeat daily (
or
or to end alarm tone.
' is selected, the setting is
Page 28
) or off ( )).
or
• If time has previously been
• Enter new time.
• If time is currently
• To cancel one digit,
• To cancel all digits
• The flashing icon
or
• Make selection.
• A confirmation tone
• Display returns to
.
.
28
entered, time is displayed.
displayed, new time will
be entered over existing
digit.
briefly.
and hold .
indicates the digit to be
edited.
or
sounds.
function menu.