Base Unit Settings - Panasonic KX-TCD510AL Operating Instructions Manual

Base Unit Settings

Setting the Base Unit Ringer Volume
To exit the operation, press
1
Press
JOYSTICK (or
move).
4
Select "Ringer
Option".
6
To increase volume, move the JOYSTICK up.
To decrease volume or set to OFF, move the
JOYSTICK down. (3 levels)
• The factory preset is medium.
Call Options
To exit the operation, press
1
Press JOYSTICK
(or move).
4
Select "Call Option".
46
at any time.
2
Select "
Setting Base".
5
Select "Ringer
Volume".
at any time.
2
Select "
Base".
3
Enter 4-digit Base Unit PIN.
(Factory Preset 0000)
7
Press JOYSTICK.
3
Enter 4-digit Base
Setting
Unit PIN.
(Factory Preset 0000)
Go to step 5 on the next page.