Viewing And Calling Back Using Caller Information - Panasonic KX-FP148RU Operating Instructions Manual

3. Telephone
3.5 Viewing and calling
back using caller
information
You can easily view caller information and call
back.
Important:
L Calling back will not be possible in the
following cases:
– The telephone number includes data
other than numbers (i.e., * or #).
– The caller information does not
include a telephone number.
{CALLER ID} {ERASE} {MENU}
{<}{>}{A}{B}
{STOP} {MONITOR} (KX-FP143)
{DIGITAL SP-PHONE}
{FAX/START}
(KX-FP148)
{SET}
1
Press {CALLER ID}.
2
Press {A} to search from the most recent
caller information.
Press {B} to search from the oldest caller
information.
3
Press {MONITOR} (KX-FP143)/{DIGITAL
SP-PHONE} (KX-FP148) or lift the handset
to call back the displayed party.
L The unit will start dialling automatically.
L To send a fax insert the document FACE
DOWN and press {FAX/START}.
To change the display of the caller
information
Press {CALLER ID} repeatedly after step 2 on
page 22.
Example:
22
1345678901
11:20 JUL 20 ,
b
SAM LEE
11:20 JUL 20 ,
L Check mark (,) on the display means the call
has already been viewed or answered.
Display while viewing
L When the unit could not receive a name, the
display will show "NO NAME RCVD".
L When no calls have been received, the
display will show "NO CALLER DATA".
To stop viewing
Press {STOP} after step 2 on page 22.
3.5.1 Editing a caller's telephone
number before calling back
1
Press {CALLER ID}.
2
Press {A} or {B} repeatedly to display the
desired item.
3
Press {CALLER ID} to display the telephone
number.
4
To insert a number in front of the telephone
number, press the desired dial key (0 to 9).
L You can also initiate the editing mode by
pressing {*}.
5
Press {MONITOR} (KX-FP143)/{DIGITAL
SP-PHONE} (KX-FP148) or lift the handset
to call back the edited number.
L The unit will start dialling automatically.
L To send a fax, insert the document FACE
DOWN and press {FAX/START}.
Note:
L The edited telephone number will not be
saved in the caller information. To save in the
navigator directory, see page 23.
To correct a mistake
1. Press {<} or {>} to move the cursor to the
incorrect number.
2. Press {STOP} to delete the number.
3. Enter the correct number.
To delete a number
Press {<} or {>} to move the cursor to the
number you want to delete and press {STOP}.
To insert a number
1. Press {<} or {>} to move the cursor to the
position to the right of where you want to
insert the number.
2. Enter the number.