Intercom - Panasonic KX-TCD455E Operating Instructions Manual

455E.book Page 45 Thursday, March 20, 2003 7:44 PM
Intercom between Handsets
You can use your handsets as a 2-way intercom.
For example, when Handset 1 calls Handset 2:
<Handset 1>
1
INT
Press INTERCOM.
• To hang up, press
• Intercom calls can be conducted within the radio cell of the current base unit, but not
with units in neighbouring radio cells.
Transferring a Call to Another Handset/Conference Call
Intercom can be used during a call to transfer an external call between handsets that are
registered to the same base unit. For example, when handset 1 transfers a call to
Handset 2:
<Handset 1>
1
(During a call)
Press INTERCOM.
• To hang up, press
*1 You can also press a dialling button, INTERCOM,
*2 If you press after pressing the desired handset number, a call can be transferred
to another handset without speaking to another handset.
If the transferred call is not answered within 30 seconds, Handset 1 will ring again.
*3 When Handset 2 answers a call transferred, press
press dialling button
Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333
2
( on the display)
<Handset 2>
.
( on the display)
INT
<Handset 2>
.
to establish a conference call.
3

Intercom

2
Press desired the
Handset Number.
3
Press TALK.*1
2
2
Press the desired
Handset Number.*2
3
t x
, or SPEAKERPHONE.
to complete a call transfer or
4
*3
3
Press TALK.*1
45