Preparation
Wall mounting
Hooks
Hook
Note:
L Make sure the screws are securely
fastened to the wall.
L Use the following wall template to position
the screws before drilling.
8
Setting the time and date
Important:
8 cm
L Confirm that the AC adaptor is connected.
L Ensure that w is not flashing.
1
Press {j}.
Screws
2
Press {v} repeatedly to display
"SETTING BS", then press {>}.
3
Press {*}.
4
Enter the current hour and minute by
selecting 2 digits for each (24-hour time
entry).
Example: 15:15
Press {1}{5} {1}{5}.
L If you make a mistake, press {C}.
5
Press {>}.
L "SETTING BS" will be displayed.
6
Press {>}, then press {*} 2 times.
7
Enter the current day, month and year by
selecting 2 digits for each.
Example: 17 May, 2004
Press {1}{7} {0}{5} {0}{4}.
L If you make a mistake, press {C}.
8
Press {>}.
L "SETTING BS" will be displayed.
9
Press {ih}.
Note:
L If a power failure occurs, set the time and
date again.
Digits will be cleared from the right.
Digits will be cleared from the right.