Table of Contents
Advertisement
Multi-unit User Operation
: Base Unit Selection
When Automatic Base Unit Access is selected, if you move outside of the radio range of
the current base unit the handset automatically searches for other registered bases.
When a specified base unit is selected, the handset will access that base unit only. Calls
(both incoming and outgoing) can be conducted only via the selected base unit, even if
the radio cells overlap with neighbouring base units.
1
2
Press MENU.
• To exit the operation, press
Operating Additional Base Units: You can register and operate your handset with up
to 4 base units. Each base unit forms 1 radio cell. If the individual bases are linked to the
same telephone line then you can extend the operating range of the system by
positioning the bases so that the two radio cells overlap. If the handset is set to AUTO
base selection, then in standby mode the handset will automatically swap to the second
base if the range on the first base is exceeded. It is not possible to transfer calls between
bases (only between handsets linked to the same base unit).
Radio Cell
E.g.
Additional
handsets
(KX-A142AL)
registered with
2 base units.
Note: Calls are disconnected when the handset moves from one radio cell to
another.
34
3
Search/Select
Search/Select
"SETTING HS".
"SELECT BS".
any time.
2
1
3
4
Search/Select
"AUTO" or specific
base unit number.
4
5
Advertisement
Table of Contents
