Fade In/Fade Out Function; Wind Noise Reduction Function; Recording Images For Wide-Screen Tvs - Panasonic NVGS37EP Operating Instructions Manual

LSQT1005ENG.book 26 ページ ２００５年１２月１６日 金曜日 午後３時１１分

Fade in/fade out function

Fade in
The image and audio gradually appear.
Fade out
The image and audio gradually disappear.
≥Set to Tape Recording Mode.
1
Press the joystick to display the icon. Move
the joystick down until icon 1 appears.
2
Move the joystick left to select the fade icon
[ ].
B B
≥The [FADE ON] indication appears on the
screen of the movie camera.
3
Press the recording start/stop button.
Start recording. (fade in)
When you start recording, the image/audio
disappeared completely and the image/audio
gradually appears.
Pause recording. (fade out)
The image/audio gradually disappears. After the
image/audio completely disappears, recording
stops.
ª
To cancel fading
Select the [ ] icon again.
≥The [FADE OFF] indication appears on the
screen of the movie camera.
ª To select the colour for fade in/out
The colour which appears in fading pictures can
be selected.
1
Set [ADVANCED] >> [FADE COLOUR] >>
[WHITE] or [BLACK].
≥While the fade in/fade out function is selected, it
takes several seconds to display the image
when you start recording images. Besides, it
also takes several seconds to pause recording.
26
LSQT1005
Record mode

Wind noise reduction function

This reduces the wind noise coming into the
microphone when recording.
≥Set to Tape Recording Mode.
1
ª
Set [BASIC] >> [WIND CUT] >> [OFF].
1
≥The default setting is [ON].
≥Reduces the wind noise depending on the wind
Recording images for wide-screen
TVs
This allows you to record images compatible with
wide-screen TVs.
Cinema Function
Images are recorded with a black belt appearing
along the top and bottom of the screen so that
they look like theatre movies.
≥Set to Tape Recording Mode.
1
ª
Set [BASIC] >> [CINEMA] >> [OFF].
≥Images played back vary depending on the TV
≥This function does not widen the recording
≥When images are played back on a TV screen,
≥Depending on the TV, the picture quality may
≥When a cinema picture is imported into a
Set [BASIC] >> [WIND CUT] >> [ON].
To cancel the wind noise reduction
function
strength. (If this function is activated in strong
winds, the stereo effect may be reduced. When
the wind weakens, the stereo effect will be
restored.)
Set [BASIC] >> [CINEMA] >> [ON].
To cancel the Cinema function
connected. Please refer to the operating
instructions for your TV.
range.
the date/time indication may be erased in some
cases.
deteriorate.
personal computer, the imported picture may
not be displayed correctly, depending on the
software in used.