Care - Siemens VS07G Series Instructions For Use Manual

Hide thumbs Also See for VS07G Series:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 19
Changing the dust bag
CLICK!

Care

Always switch the vacuum cleaner off and disconnect the power cord from the
mains before cleaning the vacuum cleaner.
The vacuum cleaner and plastic accessories can be cleaned with a commercial
plasticcleaner.
Do not use abrasive, glass or all-purpose cleaners.
Never immerse the vacuum cleaner in water.
The dust compartment can, if necessary, be cleaned with a second vacuum
cleaner or simply wiped with a a dry cloth or dusting brush.
Subject to technical changes.
32
Replacing the HEPA filter
If your vacuum cleaner is equipped with a HEPA filter, this
should be replaced once a year.
Open the dust bag compartment lid
Unlock the HEPA filter by pushing the locking tab in
the direction of the arrow and remove it from the
vacuum cleaner.
Insert the new HEPA filter and click it into place.
After vacuuming up fine dust particles, shake out
the motor protection filter to clean it and replace
the micro-hygiene filter, activated carbon filter or
HEPA filter if necessary.
en
en

Advertisement

Table of Contents
loading

Table of Contents