Caution For Ac Mains Lead - Panasonic SC-NC9 Operating Instructions Manual

Dvd stereo system
Hide thumbs Also See for SC-NC9:
Table of Contents

Advertisement

Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please
read these instructions carefully.
System
This unit
Front speakers
Center speaker
Surround speakers
Subwoofer

Caution for AC Mains Lead

(For United Kingdom)
("EB" area code model only)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin
mains plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that
the replacement fuse has a rating of 5-ampere and that it
is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
body of the fuse.
If the plug contains a removable fuse cover you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until
a replacement cover is obtained.
A replacement fuse cover can be purchased from your
local dealer.
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE
FOR THE SOCKET OUTLET IN YOUR HOME THEN
THE FUSE SHOULD BE REMOVED AND THE PLUG
CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED INTO
ANY 13-AMPERE SOCKET.
If a new plug is to be fitted please observe the wiring
code as stated below.
If in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in accordance
with the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured
markings identifying the terminals in your plug, proceed
as follows:
The wire which is coloured Blue must be connected to
the terminal which is marked with the letter N or coloured
Black or Blue.
The wire which is coloured Brown must be connected to
2
the terminal which is marked with the letter L or coloured
Brown or Red.
SC-NC9
SA-NC9 (1 unit)
SB-PF9 (2 units)
SB-PC9 (1 unit)
SB-PS9 (2 units)
SB-WNC9 (1 unit)
or the BSI mark
on the
: indicates features applicable to SC-NC9 only
SC-NC9
: SC-NC6 only
SC-NC6
Operations in these instructions are described mainly
for the remote control, but you can do the operations
on this unit if the controls are the same
WARNING: DO NOT CONNECT EITHER WIRE TO
THE EARTH TERMINAL WHICH IS MARKED WITH
THE LETTER E, BY THE EARTH SYMBOL
COLOURED GREEN OR GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOF - KEEP DRY.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type
of AC mains plug (figure A and B). Confirm the AC
mains plug fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach the fuse cover.
Fuse
(5 ampere)
SC-NC6
SA-NC6 (1 unit)
SB-PF6 (2 units)
-–
SB-WNC9 (1 unit)
OR
Fuse cover
Fuse
(5 ampere)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sc-nc6

Table of Contents