NEUTRIK xirium pro User Manual page 37

4 sec.
User Manual – XIRIUM PRO ® CA | BDA 471 2016/09
Setting transmission power
In the default setting, the transmission power is set to
0 dB.
If the devices are used indoors or over short distances:
c
Reduce the transmission power.
If the devices are used outdoors or over long distances:
c
Increase the transmission power.
If more than 1 TX are used in the network, set the
transmission power of all TXs to the same value.
Please consider chapter "4.4.3 Signal quality bar"
on page 23 and "4.4.4 Transmission power"
on page 24 for a proper setting of transmission
power.
Activating/deactivating delay
Activating the delay via the device:
c
Press and hold the Link/Delay button for 4 seconds.
The Link/Delay LED slowly flashes blue.
(
Activating the delay mode via the app:
c
On the Edit page, tap the Delay ON/OFF button.
Changing the delay time
The delay function is active.
^
On the Edit page, tap the line
c
On the Edit Delay page, change the entered delay time.
c
Enter and confirm the new delay time.
c
If the measurement unit is changed, the value is
automatically converted to the right unit.
Operation
Delay Time.
37