Links/Overview Page - NEUTRIK xirium pro User Manual

4.3.2 Links/Overview page

All devices that were added to the network via an access point are displayed on this page. The devic-
es are grouped according to transmission path. Each transmission path is assigned to one transmis-
sion channel. In stand-alone mode, the Links/Overview page is inactive.
1
Pos. Description
1 Transmission path
This grouping displays all devices that are in one
RF channel
2 Transmission channel
3 XROC indicator
Is displayed when XROC mode is active for the
RF channel
4 TX display
1 TX is needed for each transmission path
5 Repeater display
As an option, repeaters may be used.
A maximum 1 repeater per RF channel is possible.
• The display is highlighted in red when there is a
poor connection to the TX, or none at all.
User Manual – XIRIUM PRO ® CA | BDA 471 2016/09
Pos. Description
6 RX display
Each field represents one device.
A minimum 1 RX is needed for each transmission
path.
• The display is highlighted in red when there is a
poor connection to the TX, or none at all.
Button for adding devices to transmission
7
path
• Add a device: Use drag&drop to add a device
from AVAILABLE
Add several devices: Tap button and select
•
device from AVAILABLE
AVAILABLE DEVICES
8
Displays all available devices which have not yet
been assigned to a transmission path.
Tapping OPEN/CLOSE
Description of product
DEVICES.
DEVICES.
opens/closes the display.
2
3
4
5
6
7
8
17