Table of Contents
Advertisement
Management
ECO Mode
High Altitude
Turn Off Mode
Timer
Auto Shutdown
Lamp Hour Elapse
Lamp Reminding
Lamp Hour Reset
Downloaded From projector-manual.com Acer Manuals
Choose "On" to dim the projector lamp which will lower power
consumption, extend the lamp life and reduce noise. Choose "Off"
to return normal mode.
Choose "On" to turn on High Altitude mode. Operate the fans at
full speed continuously to allow for proper high altitude cooling of
the projector.
Instant Off: Shuts down the projector without fan cooling.
Instant Resume: Resumes the system when the Power button is
pressed again within 2 minutes.
Start (or Stop)
Press to start (or stop) the timer.
Period
Press
or
Alarm
Select this function to adjust the notification volume when the
timer function is enabled and time is up.
Timer Display
Choose "On" or "Off" to which timer mode to display on the
screen.
Location
Choose the location of the timer on the screen.
The projector will automatically shutdown when there is no signal
input after the allocated time. (default is 120 minutes)
Displays the lamp's elapsed operating time (in hours).
Activate this function to display a reminder to change the lamp 30
hours before its expected end-of-life.
Press the
button and choose "Yes" to turn the lamp hour
counter to 0 hours.
Note: Functions vary depending on model definition.
to adjust the timer period.
33
Advertisement
Table of Contents
