File No. Reset Function - Sanyo Xacti VPC-S70EX Instruction Manual

FILE No. RESET FUNCTION

If a newly formatted (page 92) card is used, the file name (image number) of
the captured image automatically begins from 0001. If the card is
subsequently reformatted, or if a different reformatted card is used, the file
names again begin from 0001. This is because the file number reset function
is set to "ON", and consequently it results in more than one card containing
images with the same numbers. By setting the file number reset function to
"OFF", even if the card is reformatted or the card is replaced with another
card, the consecutive numbering of file names continues from the last number
recorded by the camera.
<File number reset function "ON">
Card A
Card B
<File number reset function "OFF">
Card A
Card B
Downloaded From camera-usermanual.com Sanyo Manuals
89
English
File name (image number)
0001, 0002...... 0012, 0013
Replace card
0001, 0002...... 0012, 0013
File name (image number)
0001, 0002...... 0012, 0013
Replace card
0014, 0015........0025, 0026