Panasonic KW-WP1050E Operating Instructions Manual page 53

Setting
[IP Address]
[Subnet Mask]
[Default Gateway]
[DNS Server 1]
[DNS Server 2]
[Domain Name]
[MTU]
Description
L Enter the IP address and subnet mask assigned by your
Internet service provider or the hotel you are staying in in
each data field.
L Set 4 numbers (0 – 255) separated by periods such as
"192.168.102.253".
Note:
L There are some restrictions on IP address entry. For
example, "0.0.0.0" and "255.255.255.255" are not available.
L Enter the default gateway address assigned by your Internet
service provider or the hotel you are staying in in each data
field.
L Set 4 numbers (0 – 255) separated by periods such as
"192.168.102.253".
Note:
L There are some restrictions on IP address entry. For
example, "0.0.0.0" and "255.255.255.255" are not available.
L If you have the DNS (Domain Name System) server
addresses assigned by your Internet service provider or the
hotel you are staying in, enter them in this data field. They
usually have two addresses.
L Set 4 numbers (0 – 255) separated by periods such as
"192.168.102.253".
Note:
L There are some restrictions on IP address entry. For
example, "0.0.0.0" and "255.255.255.255" are not available.
L If you have the domain name assigned by your Internet
service provider or the hotel you are staying in, enter domain
name (1 – 255 characters) in this data field.
L MTU is the maximum size of packet that can be sent.
L If you have the MTU value assigned by your Internet service
provider or the hotel you are staying in, enter the MTU value
(576 – 1500) in this data field. Otherwise you need to leave
the default MTU value (1500).
Helpline Tel. No.: U.K. 0844 844 3898
Getting Started
53