Table of Contents
Advertisement
Base Unit Settings
Reset button
If you forget the user name and password for the base unit, press and hold the "FACTORY
DEFAULT RESET" button on the bottom of the base unit with a pointed object until all the
indicators go out. The settings are reset to default (see below). If necessary, set the
settings again.
Note:
L You need to register the handset to the base unit again when you reset the base unit to
factory default.
See "Registering the handset" on page 136.
Default settings
Internet Connection Mode
Connection Mode
MTU size
– PPPoE
– DHCP
– Static
204
FACTORY DEFAULT RESET button
DHCP
1492 bytes
1500 bytes
1500 bytes
Helpline Tel. No.: U.K. 0844 844 3898
Advertisement
Table of Contents
Troubleshooting
