Sony XBR-75X910C Reference Manual page 38

Please consult professional advice prior to installation.
Wall construction and mounting location can vary widely. For safety, TV mount screws have not been included.
1. Do not install the wall mount on curved wall surfaces such as a pillar, or where the corners or the
sides of the TV protrude away from the wall surface.
2. Install the TV on a wall that is both vertical and flat. (installing the TV on an overhanging,
unstable, or uneven wall may cause the TV to fall and cause injury or property damage)
3. If mounting to wooded joint, make sure that the mounting screws are anchored into the center
of the stud. The use of a stud finder is highly recommended. Spacing of the 4 holes in the wall
mount bracket are too far apart for more than 2 lag bolts to hit a vertical wall stud.
4. Installers are responsible for providing any hardware not included in the packaging necessary to
mount the TV.
5. Installer must verify that the supporting surface will safely support 4 times the combined weight
of the equipment and all attached hardware and components. The wall mount can handle a
television weight and all attached hardware and components up to 110lb.
Please ensure that the supplied wall mount bracket is secured to a surface
using a combination of screws into studs and anchors/toggle bolts that can
support 4 times the weight of the TV.
Model Weight (without Stand)
•XBR-55X900C : Approx. 41 lbs (19 Kg)
•XBR-65X900C : Approx. 52 lbs ( 24 Kg)
•XBR-75X910C : Approx. 75 lbs ( 34 Kg)