Maintenance - Panasonic EY6932 Operating Instructions Manual

. MAINTENANCE

Use only a dry, soft cloth for wiping
the unit. Do not use a damp cloth,
thinner, benzine, or other volatile sol-
vents for cleaning.
BATTERY RECYCLING
ATTENTION:
A nickel metal hydride battery that is
recyclable powers the product you
have purchased.
Please call 1-800-8-BATTERY for
information on how to recycle this
battery.
RECOMMENDED SPEED SELECTION
CAUTION: USE AT LOW SPEED WHEN STRONG FORCE IS NEEDED
DURING OPERATION.
(Using at high speed while a strong force is applied may cause a
motor breakdown.)
Use the following as a guide to select low or high speed for the job.
EY6932
MATERIAL/ MORTAR /
CONDITION BRICK
ø 10 mm (3/8")
HIGH
or less
ø 13 mm (1/2")
LOW or less
(Slow operation)
DRILLING
WOOD /
YELLOW PINE
Thickness: 40 mm
(1-37/64") or less Thickness: 1.6 mm (1/16") or less
ø 6.5 mm (1/4")
Not used
ø 36 mm (1-27/64") ø 13 mm (1/2")
or less
- 10 -
. ACCESSORIES
Use only bits suitable for size of drill's
chuck.
METAL METAL HOLE SAW
Cold-rolled steel plate (SPC)
Not used
or less
ø 34 mm (1-11/ 32")
or less or less
SCREW
TIGHTENING
Wood screws
ø 4 mm (5/32")
or less
ø 6.8 mm (17/64")
or less