Miele ESW 6380 Operating And Installation Instructions page 7

Technical safety

Installation, repair and maintenance work should be performed by
a Miele authorized service technician in accordance with national
and local safety regulations and the provided installation instruc-
tions. Contact Miele's Technical Service Department for examination,
repair or adjustment. Repairs and other work by unauthorized per-
sons could be dangerous and may void the warranty.

A damaged warming drawer can be dangerous. Always check for
visible signs of damage. Never use a damaged appliance.

Reliable and safe operation of the drawer can only be assured if it
has been connected to the electrical supply.

Be certain the drawer is properly installed and grounded by a
qualified technician. To guarantee the electrical safety of this appli-
ance, continuity must exist between the appliance and an effective
grounding system. It is imperative that this basic safety requirement
be met. If there is any doubt, have the electrical system of the house
checked by a qualified electrician.

Before connecting the appliance to the power supply, ensure that
the connection data (voltage and frequency) on the data plate of the
drawer match the electrical supply.
This data must correspond in order to avoid the risk of damage to
the warming drawer. Consult a qualified electrician if in any doubt.

Do not connect the drawer to the electrical supply with a power
bar or extension cord. These are a fire hazard and do not guarantee
the required safety of the appliance.

For safety reasons, the warming drawer may only be used when it
has been fully installed.

This drawer may not be used in non-stationary locations (e.g. on a
ship).
IMPORTANT SAFETY INSTRUCTIONS
7