Replacing Carbon Brushes; Maintenance - Makita 9901 Instruction Manual

MAINTENANCE

1. Limit mark
1
1. Screwdriver
2. Brush holder cap
ACCESSORIES
CAUTION:
• These accessories or attachments are recommended for use with your Makita tool specified in this manual. The
use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or
attachment for its stated purpose.
If you need any assistance for more details regarding these accessories, ask your local Makita service center.
• Abrasive belts
• Carbon plate
• Sanding shoe
CAUTION:
• Always be sure that the tool is switched off and unplugged before
attempting to perform inspection or maintenance.

Replacing carbon brushes

001145
Remove and check the carbon brushes regularly. Replace them when they
are worn down to the limit mark. Keep the carbon brushes clean and free to
slip in the holders. Both carbon brushes should be replaced at the same time.
Use only identical carbon brushes.
1
Use a screwdriver to remove the brush holder caps. Take out the worn carbon
003397
brushes, insert the new ones and secure the brush holder caps.
2
To maintain product SAFETY and RELIABILITY, repairs, any other mainte-
nance or adjustment should be performed by Makita Authorized Service Cent-
ers, always using Makita replacement parts.
• Dust bag
• Belt sander stand (For Model 9901,9924DB )
7