Accumulator removal
When the operational life of the product is over it is necessary to remove the accumulator and
deliver it to the collection spot, where the accumulator will be safely disposed off.
Accumulator removal:
1/ remove the adaptor from the unit
2/ at the bottom side of the cover is a cross-head screw, that needs to be removed. Screw location
is marked by the arrow in the picture.
3/ use a small flat-head screw driver to remove the bottom cover. Place it in to the place as shown
on the picture. Lift the cover. Next picture shows where to put the screw-driver to fully open the
cover.
¨
4/ unscrew two screws that hold the accumulator and snip off the supply cables. Take the
accumulator to your closest collection spot for environmentally-safe disposal.
ENG - 44