Amped Wireless REC44M User Manual page 59

I cannot find my Home Network when scanning for wireless networks in the Setup Wizard.
a. The Range Extender may be out of range. Move the Range Extender closer towards the wireless router
and try the Setup Wizard again from the Web Menu. It is recommended that your Home Network shows
a signal strength of 70% or greater in the Setup Wizard SCAN results.
b. Go to the Wireless Settings tab in the web menu and access the Wireless Coverage Controls for your
specific wireless network (2.4GHz or 5GHz). Make sure the setting is at 100% and try again.
c. Make sure that your Home Network's wireless SSID is broadcasting and not hidden. If your Home
Network SSID is hidden, you will need to manually setup the Range Extender through the Wireless
Settings > Home Network Settings menu.
My Range Extender was working fine previously, but now I can no longer access the Internet through the
Range Extender. Or, I had a
The Range Extender should automatically heal itself and reconnect to your wireless network. However, in the
event that it does not and you are not able to access the Internet or your home network please try the following
options:
a. Reboot the Range Extender, wait 3 minutes for the Range Extender to reconnect to your network and
try to access the Internet.
POWER OUTAGE and now the Range Extender no longer works.
58