JUKI TL series Service Manual page 28

3-5 Adjustment of eccentric shaft of thread trimmer solenoid link A
○ Fix ❶ thread trimmer solenoid link A with ❷ thread trimmer clutch plate collar, ❸ thread trimmer clutch plate
collar setscrew, ❹ thread trimmer auxiliary link washer and ❺ thread trimmer auxiliary link stopper E-ring.
❹ Thread trimmer auxiliary
link washer A31099DC000
Thread trimmer auxiliary link asm.
A2464D250A0
3-6 Adjustment of thread trimmer clutch plate collar
○ After assembling ❶ thread trimmer solenoid link A, perform adjustment of eccentricity with ❷ thread trimmer
clutch plate collar (adjustment of clearance between roller holding cam and link arm support plate) and ad-
just clearance to 1 to 3 mm.
Link arm support plate
❺ Thread trimmer auxiliary link
stopper E-ring RE0400000K0
Roller holding cam
1 to 3 mm
Looper link arm asm. A1727D250A0A
❶ Thread trimmer solenoid link A
❷ Thread trimmer clutch plate collar
❶ Thread trimmer solenoid link A
26
– –
❷ Thread trimmer clutch plate
collar A2435033000
❸ Thread trimmer clutch plate
collar setscrew