Ica-Hm315W Installation - Planet ICA-HM136 Quick Installation Manual

3. Digital Input (GND + Alarm)
An alarm input for connecting devices that can toggle between an open and closed
circuit, for example: PIRs, door/window contacts, glass break detectors, etc. When
a signal is received the state changes and the input becomes active.
4. Relay output (COM +N.O.) / (COM+N.C.)
An output to Relay switch, for example: LEDs, Sirens, etc
5. Digital Input/Alarm Input
1) GND (Ground): Initial state is LOW
2) Alarm: Max. 50mA, DC 3.3V
6. Relay Output
1) N.C. (Normally Close): Max. 1A, 24VDC or 0.2A, 125~240VAC
2) COM: (Common)
3) N.O. (Normally Open): Max. 1A, 24VDC or 0.2A, 125~240VAC
7. Power Jack
The input power is DC 12V.
ONLY use package power adapter supplied with the internet.
Otherwise, the product may be damaged.
Note
8. MIC in (audio in)
Connect a microphone to the network camera.
9. Line out (audio out)
Connect a loud speaker to the network camera. This is for voice alerting and
two-way audio.

2.2.3 ICA-HM315W Installation

1. Fix IR camera to desired location with stand
2. Plug-in Ethernet Cable into RJ45 connector (LAN port)
3. Connect the attached power adapter to camera and plug-in this adapter into
power outlet
4. Connect Video BNC connector to a TV set if necessary (to check camera viewing
angle and focus)
5. Done
8