Panasonic BT-LH1700W Operating Instructions Manual page 19

Main Menu
(continued)
g About the SUB WINDOW
You can compare saved still and moving images or show the Wave Form Monitor (WFM) by using the "SUB
WINDOW" function to separate the main window into 2 displays as shown below.
Depending on the settings of the "SUB WINDOW" (FULL, PART, WFM) in the "SYSTEM CONFIG" menu
( page 18) it can be switched as shown below.
Every time you press the [FUNCTION1] (or [FUNCTION2]) button (
function, the window switches (To use the "SUB WINDOW" function, assign it to [FUNCTION1] or
[FUNCTION2]).
• FULL
The main window is reduced and made into 2 sub window (sub window+sub window).
Normal window
(main window)
moving image
• PART
Only the sub window size is cut out of the main window, and the cut section is made into 2 sub window images
(sub window+sub window).
Normal window
(main window)
moving image
The central section is cut out
• WFM
Displays the Wave Form Monitor image
Normal window
Precautions when selecting FULL/PART
This function compares screens with the same input terminal and same format. If different input formats, or if
signals are input between different input channels, the sub-window (left side, still image) becomes blurred and
blanking occurs. However, if the same format signals are input into the input terminal when acquiring the still image,
the images will be displayed correctly.
Press [FUNCTION1] or [FUNCTION2] once
Before inputting the image
(sub window+sub window)
Press
[FUNCTION1]
or
[FUNCTION2]
once
moving image
Press [FUNCTION1] or [FUNCTION2] once
Before inputting the image
(sub window+sub window)
Press
[FUNCTION1]
or
[FUNCTION2]
once
moving image moving image
Lines up and displays the
section cut out of the main
window
Press [FUNCTION1] or
[FUNCTION2] once
WFM display
Press
[FUNCTION1]
or
[FUNCTION2]
once
WFM (Wave Form Monitor)
page 17) assigned to the "SUB WINDOW"
Press
[FUNCTION1]
or
[FUNCTION2]
once
moving image
Press
[FUNCTION1]
or
[FUNCTION2]
once
After inputting the image
(sub window+sub window)
still image moving image
After inputting the image
(sub window+sub window)
still image moving image
* Only compatible with
HD signals
The window is displayed in 16:9 aspect.
19