Mechanical Disassembly; Stand Removal - Sanyo LCD-20CA1Z Service Manual

Mechanical Disassembly

Stand Removal

1. Remove a screw and remove a stand cover.
2. Position TV face down on a padded or cushioned
surface to protect the screen and finish.
3. Remove 4 screws to take the stand off.
CAUTION: Hold the stand firmly as you remove the
last screw.
Cabinet Back Removal
1. Remove 4 screws and remove the Cabinet Back.
Note: The cabinet back may still be a little tight due to the
snaps at the other locations.
Snap
Snap
480 mm
Screen Center
226.2 mm
[ Details of Dimensions ]
-9-
Snap
75 mm
226.2 mm