GE AF-650 GP Quick Installation Manual page 39

EN-04 DHCP Server
Range:
[000.000.000.000 – 255.255.255.255] Read only. Displays the IP address of the found DHCP or BOOTP server.
NB!
A power-cycle is necessary after setting the IP parameters manually.
EN-05 Lease Expires
Range:
[dd:hh:mm:ss]
EN-06 Name Servers
Option:
[0] Primary DNS
6
[1] Secondary DNS
EN-07 Domain Name
Range:
Blank [0-19 characters]
EN-08 Host Name
Range:
Blank [0-19 characters]
EN-09 Physical Address
Range:
[00:1B:08:00:00:00
08:FF:FF:FF]
EN-1# Ethernet Link Parameters
Option:
[0] Port 1
[1] Port 2
EN-10 Link Status
Option:
[0] No link
[1] Link
EN-11 Link Duration
Option:
Link Duration Port 1 (dd:hh:mm:ss)
EN-12 Auto Negotiation
Option:
[0] Off
[1] On
38
Function:
Function:
Read only. Displays the lease-time left for the current DHCP-assigned IP address.
Function:
IP addresses of Domain Name Servers. Can be automatically assigned when using DHCP.
Function:
Domain name of the attached network. Can be automatically assigned when using DHCP.
Function:
Logical (given) name of option.
Function:
– 00:1B: Read only Displays the Physical (MAC) address of the option.
Function:
Applies for whole parameter group.
Function:
Read only. Displays the link status of the Ethernet ports.
Function:
Read only. Displays the duration of the present link on each port in dd:hh:mm:ss.
Function:
Configures Auto Negotiation of Ethernet link parameters, for each port: ON or OFF.
Link Speed and Link Duplex can be configured in par. EN-13 and EN-14.
Modbus TCP