Adjustment For Video Playback - Kenwood DDX5016DAB Instruction Manual

SETTINGS SETTINGS
Adjusting the Digital Time Alignment (DTA)
Make fine adjustments to the delay time of
the speaker output to create a more suitable
environment for your vehicle.
1
Display the <Position> screen. (Page 47)
2
Display the <Position DTA> screen.
3
Select the speaker you want to adjust (1),
and then adjust each item (2).
<Distance> Adjusts the Digital Time
Alignment (DTA) value.
<Gain>
Adjusts the output volume of
the selected speaker.
• To determine the adjustment value, see the
right column.
• To initialize the setting value, press
[Initialize].
48
Determining the value for <Position DTA>
adjustment
If you specify the distance from the center of the
currently set listening position to every speaker,
the delay time will be automatically computed
and set.
1 Determine the center of the currently set
listening position as the reference point.
2 Measure the distances from the reference point
to the speakers.
3 Calculate the differences between the distance
of the furthest speaker and other speakers.
4 Set the DTA value calculated in step 3 for
individual speakers.
5 Adjust gain for individual speakers.
Example: When <Front All> is selected as the
listening position
60 cm
80 cm
150 cm
+0 cm

Adjustment for video playback

❏ Adjusting the picture
You can adjust the picture quality.
1
Display the picture adjustment screen.
On the source control screen:
2
Select [DIM ON] (dimmer on) or [DIM OFF]
+90 cm
(dimmer off).
+70 cm